Please use this identifier to cite or link to this item: http://ena.lp.edu.ua:8080/handle/ntb/51766
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGajadhur, Marta
dc.contributor.authorSkowroński, Paweł
dc.coverage.temporal23–25 November 2018, Lviv
dc.date.accessioned2020-06-09T07:07:24Z-
dc.date.available2020-06-09T07:07:24Z-
dc.date.created2018-11-22
dc.date.issued2018-11-22
dc.identifier.citationGajadhur M. Colour reproduction with ecological flexographic inks / Marta Gajadhur, Paweł Skowroński // Litteris et Artibus : proceedings, 23–25 November 2018, Lviv. — Lviv : Lviv Politechnic Publishing House, 2018. — P. 211. — (7th International academic conference “Mechanical engineering, materials science, transport 2018” (MEMST-2018)).
dc.identifier.isbn978-966-941-294-2
dc.identifier.urihttp://ena.lp.edu.ua:8080/handle/ntb/51766-
dc.description.abstractThe purpose of the study was to examine the colour reproduction with ecological flexographic inks. The process colour inks such as: biodegradable and waterbase were used in the research. The laboratory prints were made with the use of Flexiproof 100 device to simulate the machine prints. Spectrophotometric measurements were made on the printouts and the collected data was used to generate ICC profiles. The colour gamuts were visualized on the basis of ICC profiles and Gamutvision software. The 3D and 2D visualizations were used in the evaluation.
dc.format.extent211
dc.language.isoen
dc.publisherВидавництво Львівської політехніки
dc.publisherLviv Politechnic Publishing House
dc.relation.ispartofLitteris et Artibus : proceedings, 2018
dc.subjectColour reproduction
dc.subjectecological inks
dc.subjectcolour gamut
dc.subjectICC profiles
dc.subjectflexographic printing
dc.titleColour reproduction with ecological flexographic inks
dc.typeConference Abstract
dc.rights.holder© Національний університет “Львівська політехніка”, 2018
dc.contributor.affiliationWarsaw University of Technology
dc.format.pages1
dc.identifier.citationenGajadhur M. Colour reproduction with ecological flexographic inks / Marta Gajadhur, Paweł Skowroński // Litteris et Artibus : proceedings, 23–25 November 2018, Lviv. — Lviv : Lviv Politechnic Publishing House, 2018. — P. 211. — (7th International academic conference “Mechanical engineering, materials science, transport 2018” (MEMST-2018)).
dc.relation.references[1] M. Gajadhur, A. Łuszczyńska: “Influence of pearlescent pigments on light-fastness of waterbased flexographic inks”, Dyes and Pigments, vol. 138, pp. 119-128, March 2017, DOI:10.1016/j.dyepig.2016.11.033.
dc.relation.references[2] M. Gajadhur: “Pearlescent index of water-base flexographic inks with pearlescent pigments addition”, Polish Paper Review, vol. 72, pp. 779-782, December 2016, DOI:10.15199/54.2016.12.3.
dc.relation.references[3] M. Gajadhur, A. Steć: “Improvement of abrasion resistance by over-varnishing in the case of water-based flexographic printing”, Journal of Print and Media Technology Research (JPMTR), vol. 5, pp. 15-26, January 2016, DOI:10.14622/JPMTR-1425.
dc.relation.references[4] M. Gajadhur: “Influence of different factors and modifying additives on the printing ink layer properties”, in Proc. of Cost Training School – Printing of bio-based materials in packaging, 2013, pp. 57-69.
dc.relation.references[5] M. Gajadhur: “Quality of prints made with water-based flexographic inks”, in Proc. of 7th International PhD Students and Young Scientists Conference – Young Scientists Towards the Challenges of Modern Technology, 2012, pp. 33.
dc.relation.references[6] International Colour Consortium: ‘Specification ICC.1:2004-10. Image technology colour management – Architecture, profile format, and data structure’, ICC 2004.
dc.relation.referencesen[1] M. Gajadhur, A. Łuszczyńska: "Influence of pearlescent pigments on light-fastness of waterbased flexographic inks", Dyes and Pigments, vol. 138, pp. 119-128, March 2017, DOI:10.1016/j.dyepig.2016.11.033.
dc.relation.referencesen[2] M. Gajadhur: "Pearlescent index of water-base flexographic inks with pearlescent pigments addition", Polish Paper Review, vol. 72, pp. 779-782, December 2016, DOI:10.15199/54.2016.12.3.
dc.relation.referencesen[3] M. Gajadhur, A. Steć: "Improvement of abrasion resistance by over-varnishing in the case of water-based flexographic printing", Journal of Print and Media Technology Research (JPMTR), vol. 5, pp. 15-26, January 2016, DOI:10.14622/JPMTR-1425.
dc.relation.referencesen[4] M. Gajadhur: "Influence of different factors and modifying additives on the printing ink layer properties", in Proc. of Cost Training School – Printing of bio-based materials in packaging, 2013, pp. 57-69.
dc.relation.referencesen[5] M. Gajadhur: "Quality of prints made with water-based flexographic inks", in Proc. of 7th International PhD Students and Young Scientists Conference – Young Scientists Towards the Challenges of Modern Technology, 2012, pp. 33.
dc.relation.referencesen[6] International Colour Consortium: ‘Specification ICC.1:2004-10. Image technology colour management – Architecture, profile format, and data structure’, ICC 2004.
dc.citation.conference8th International youth science forum «Litteris et Artibus»
dc.citation.journalTitleLitteris et Artibus : proceedings
dc.citation.spage211
dc.citation.epage211
dc.coverage.placenameЛьвів
dc.coverage.placenameLviv
Appears in Collections:Litteris et Artibus. – 2018 р.



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.